INTENSO ADAPTER +CABLE SET / MODEL W140A3C+C520C / KLEUR ZWART

Charging power of up to 140 W
The Intenso Power Adapter Set combines the W140A3C GaN power adapter with the C520C USB-C to USB-C cable. When used individually, either of the two main ports, USB-C 1 or USB-C 2, provides up to 140 W of charging power. The adapter supports Power Delivery 3.1, PPS and Quick Charge 4.0 and is backwards compatible. The charging power actually achieved depends on the connected device and the port combination used.

Four ports and a 240 W cable
Three USB-C ports and one USB-A port allow you to charge up to four compatible devices simultaneously. When used individually, USB-C 3 and USB-A each provide up to 30 W. When several ports are used at the same time, the available power is distributed according to the port combination. The included 2 m cable supports Power Delivery 3.1 and Quick Charge 5 with up to 240 W. Within this set, the maximum charging power is determined by the 140 W adapter. An E-Marker chip, data transfers at up to 480 Mbit/s and reinforced strain relief complete the cable’s features.

GaN technology in a compact format
The W140A3C uses gallium nitride, also known as GaN. The material has a higher power density than conventional silicon, allowing power adapters to be designed in a compact format while supporting higher voltages and currents. The black adapter measures 67 × 31 × 100 mm, weighs 236 g and supports input voltages from 100 to 240 V at 50 or 60 Hz.